I have a L3010 that won't start. Used it and turned it off. Went to restart and it wouldn't do anything. Made a buzzing sound. Would not jump off. Left jumper cables on for 2 hours using my diesel truck. Put in new battery, nothing. It pull started but guages weren't working. Any help??
Starting help
- Thread starter booperry67
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
So key just to on but not to crank you just got a buzzing sound, Sounds like you have either a bad battery cable end or connection.
Start with the cable ends especially the ground on the frame.
Pull them clean them.
Do you have a test light?
If so check for power at the starter (main battery connection).
Start with the cable ends especially the ground on the frame.
Pull them clean them.
Do you have a test light?
If so check for power at the starter (main battery connection).
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Just to clarify, key on, no light , no dash light , nadda nothing?
If so check the main fuse down by the starter.
If you have light but no cranking then its a safety switch issue, double check all levers.
If so check the main fuse down by the starter.
If you have light but no cranking then its a safety switch issue, double check all levers.