SSV75 Error codes

[rswize]

I keep getting error code E9000 before pushing the exhaust dpf button and revving motor to clear it. Upon pushing button, I then get an error E9006 and a beeping noise but the DPF light goes off. I let it idle for about 20 minutes and it still is on. Any suggestions?

 

[100 td]

From a different model, but may have some relevance, check your manual if you have one

E9000: DPF must be regenerated, but low engine rpm is unable to start DPF regeneration.
Rev up the engine rpm and start DPF regeneration.
If this error code number still appears, immediately contact your local dealer.


E9006: DPF must be regenerated, but unable to start regeneration because the inhibit switch is activated. Move the machine to a safe place and release the inhibit switch to start DPF regeneration.If this error code
number still appears,immediately contact your local dealer.

 

[rswize]

Thanks I will give that a try regarding the inhibitor switch

 

[Jordo]

Thanks I will give that a try regarding the inhibitor switch

Any luck I’m having the same issue

 

[Jordo]

Any luck I’m having the same issue

Have a 2019 ssv75 and code e9000 comes up then I tap dpf button at high rev n code e9006 comes up