Skidding with BH77

bluestang

New member

Equipment
B2650
Jan 11, 2021
6
0
1
BC Canada
I have a B2650 with the BH77 hoe. Wondering if it is going to do any harm using the hoe and thumb to lift the butt of a log, pull it up by one of the rear tires so it is parallel to the tractor and skidding short distances at very low speed? This means the hoe is in the 90 degree position.
 

Quick

Well-known member

Equipment
B2601, LA435, BH70, LP SGC0554 Grapple, LP RB1672 Rear Blade, King Kutter 60" BB
Sep 23, 2021
149
267
63
St. Clair, MO.
Eeek! Bound to be a better way to do it than that?
 

Donystoy

Well-known member
Lifetime Member

Equipment
LX2610HSDCC, B/H, Loader, plus numerous other attachments. B7200 sold
Dec 10, 2013
714
356
63
Binbrook, Ontario
I frequently skid logs with the BH attached but I put a rope around the front frame of the tractor under the loader with the other end around the tree. I never use the hoe for anything but what it was designed for. I use the thumb only when stationary.
 

PoTreeBoy

Well-known member
Lifetime Member

Equipment
L35 Ford 3930
Mar 24, 2020
3,709
2,283
113
WestTn/NoMs
I have a B2650 with the BH77 hoe. Wondering if it is going to do any harm using the hoe and thumb to lift the butt of a log, pull it up by one of the rear tires so it is parallel to the tractor and skidding short distances at very low speed? This means the hoe is in the 90 degree position.
I'll admit that I've used my BT900 as a sideboom. But I lifted the log completely off the ground, near the center, and was extremely careful not to bump the load against the ground, a tree, etc. The boom and stick are not designed for the kind of side load you're proposing to exert on it. When you go around a curve while skidding like that, you exert even more load.

A better method would be to use skidding tongs or a skidding grapple.
 

nbryan

Well-known member

Equipment
B2650 BH77 LA534 54" ssqa Forks B2782B BB1560 Woods M5-4 MaxxHaul 50039
Jan 3, 2019
1,398
927
113
Hadashville, Manitoba, Canada
No. Don't do it. Your tractor's pulling power can and will damage the backhoe's hydraulics and frame. Catching one stump while dragging and huge torque on the hoe.
In that situation slowly moving a log with the bh77/thumb means, to me at least, operating it as a backhoe and planting the stabs/loader etc and grabbing and moving the log with backhoe only power.
Or pulling with the tractor's frame as suggested already.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
35,425
10,620
113
Sandpoint, ID
I have a B2650 with the BH77 hoe. Wondering if it is going to do any harm using the hoe and thumb to lift the butt of a log, pull it up by one of the rear tires so it is parallel to the tractor and skidding short distances at very low speed? This means the hoe is in the 90 degree position.
Yea BAD idea.
Easily do a lot of damage!