I posted a problem resetting the "service/inspect" on my 2006 Kubota L4330 hstc. It is NOT the wrench symbol im talking about, but on the LCD display, when the key is "on" or running, above the tach, hours indicator, my tractor spelled "service/inspect" etc. Manual just speaks of removing "wrench" symbol. I call local Kubota Service, and a nice guy said, this comes on every 50 hrs, to remind you of maint, etc. he simply do the following;
1.) turn key on"do not start"
2.) press "mode" and travel speed" buttons AT THE SAME TIME!, and bingo gone for another 50hrs.
he stated some kubota owners never got the two page instructions with their manual etc...still available from kubota, for those that might have the same problem i did, great site!
1.) turn key on"do not start"
2.) press "mode" and travel speed" buttons AT THE SAME TIME!, and bingo gone for another 50hrs.
he stated some kubota owners never got the two page instructions with their manual etc...still available from kubota, for those that might have the same problem i did, great site!
