I just purchased a new L3560 HSTC and it has the mechanical seat. I’m trying to adjust the suspension and followed the Owner’s Manual instructions, but can’t get it to handle my weight. I weigh a little over 250 pounds and when I hit a small bump, the seat bottoms out and tries to take my fillings with it. Am I missing something or do I need to move up to the air ride seat?
Seat adjustment
- Thread starter Rick1142
- Start date
fried1765
Well-known member
Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
If you've tightened down the setting to full max and you're still not keeping it from bottoming out, which I find odd because I'm 250's and mine will stop me dead and about 3/4 adjusted, but if it's still not enough air ride might be your next choice.
You running the tires at max inflation?
You running the tires at max inflation?
They are at max pressure and have ballast. In the morning, I will make sure that I have maxed out the turns. Thank you for replying.
NCL4701
Well-known member
Equipment
L4701, T2290, WC68, grapple, BB1572, Farmi W50R, Howes 500, 16kW IMD gen, WG24
Run the pressure in the rears down to about 15 psi (some would recommend 12 psi). Better ride, better traction. Rear tractor tires need to flex to work properly. Fronts, not so much. Keep them (fronts) at max pressure if you’re running a loader.
(Edited for clarity.)
Last edited:
fried1765
Well-known member
Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Sorry but the Air ride seat is the only fix to crappy OEM K suspension seats. Grammer makes the K one just drop it in and bold it down.
I will probably end up going that way, but I need to do a little at a time in order to stay married. I just spent over 50 grand on a tractor that wasn’t really needed. Thank y’all for the input. Was hoping that there was a zip tie somewhere that I missed.
OEM seats leave a lot to be desired. I’m a big guy with big feet. Finally spaced up and tilted back the seat on the M59. 2” rise on the front and 1” on the back with 1” thick rubber blocks. Made a world of difference in comfort and position. Much kinder on the back and knees.
I’m maxed out on the spring tension. Might be a place to add some cushion rubber when bottoming out. So far not as big problem as seat position.
Do have a seat cover. Might try an extra cushion under the cover?
I’m maxed out on the spring tension. Might be a place to add some cushion rubber when bottoming out. So far not as big problem as seat position.
Do have a seat cover. Might try an extra cushion under the cover?
fried1765
Well-known member
Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Yup....as I am sure you must realize....
Divorces cost WAY more than $50K
Don't ask me how I know.
fried1765
Well-known member
Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Bought once.....lasted 34 years.....lost 1/2 of everything.
Been renting for past 23 years.
If I had only known!
Last edited:
I did check and make sure I had all of the turns in the suspension handle. I was 4 short. I added them,which helped a lot, but still need more. I will deal with the tires next. Thank you!
Good to hear; that gentleman would shit if he saw my weight, but I'm down 100 pounds.
Get yourself an air seat, you'll never regret it.
Women come and go; a good air seat will run at least 20 years before blowing out.
I remember a thread from the past where a 1 liter emptied bottle was capped in inserted under the seat for a cushion!