The blades are spinning counter clockwise and the manual says they are only to spin one direction, clockwise. Any suggestions on how to fix this? I’m running it on my svl75-3 standard flow skid steer. I already swapped hydraulic hoses around and no luck.
SC6072 Cutter Blades Spin Wrong Direction
- Thread starter Hatcher810
- Start date
interesting.... you changed hoses but spun CW.....
call Kubota in the morning
have to follow this post to see what IS the answer...
call Kubota in the morning
have to follow this post to see what IS the answer...
looks like an EATON 2000 series motor, so can go CW or CCW.
If so... when Port B is pressurized, it goes CCW.
perhaps remove the safety covers and see HOW it's plumbed
if you do, please post a picture cause gee, swapping hoses SHOULD have changed direction....
If so... when Port B is pressurized, it goes CCW.
perhaps remove the safety covers and see HOW it's plumbed
if you do, please post a picture cause gee, swapping hoses SHOULD have changed direction....
