ROPS Size on new L3901 ?

[Outdrz]

Tractor is two hours away from me, so I cant measure the ROPS at the moment...

I've decided to shop for a ROPS clamp system so I can mount some LED lights. Anyone have a newer L series nearby who can measure the ROPS?

Am considering Kens Bolt-On ROPS Clamps (thinking its probably 2x3"). Certainly open to other suggestions / sources for ROPS Clamps.

Thanks in advance!

 

[wgator]

On THIS THREAD POST 2 Yooper said: 2” on the vertical x 3” on the horizontal as measured on my L3901.

 

[cliffboyer]

Yes, 2x3.

One thing I noticed shortly after getting my l3301, the ROPS is asymmetric. The verticals are just ever so slightly different in the lower forming. Perhaps even making the ROPS a hair off center.

 

[Outdrz]

Thanks to both wgator and cliffboyer!

Appreciate both ya'll helping a fellow orange tractor owner out! Now, about those rops clamps...