I want a RH fender grip Handle for my L35 always thought Kubota stingy for not installing one in the first place. Have searched google and Messick, can't find it. Looked on this forum everything but an L35. Appreciate any wisdom, Thanks, Phil
Right hand fender grip
- Thread starter Phil Sanchez
- Start date
RickCf
New member
Lifetime Member
Equipment
L4701, 5ft Land Pride Rotary Cutter , 5ft Land Pride Tiller, Misc. other imp.
This is what I ordered for my L3200 and it fits most "L" series tractors:
PN-T1060-29450, which was replaced by: PN-T1060-29470
Last edited:
CaveCreekRay
Well-known member
Lifetime Member
Equipment
L3800 HST, KingKutter box scraper, KingKutter 66" rake, County Pride Subsoiler
I think the L handles are the same as all other Kubotas. Double check with your dealer but, I added one after I found out from a friend that they were available. I think it was $70.
When you get yours, you might think the holes don't line up. The studs off the handle are fairly long and are not parallel, they follow the fender radius and point toward each other slightly. To get mine to line up with the holes, I left the handle in the sun for an hour and then flexed it to get the studs in the holes and it fit perfectly seated against the fender.
Word is, Kubota did not want the "liability" of people climbing in on the same side as the FEL controls. I think that was dopey because there is no step on that side. Problem solved. I use that handle all the time now that I have it.
When you get yours, you might think the holes don't line up. The studs off the handle are fairly long and are not parallel, they follow the fender radius and point toward each other slightly. To get mine to line up with the holes, I left the handle in the sun for an hour and then flexed it to get the studs in the holes and it fit perfectly seated against the fender.
Word is, Kubota did not want the "liability" of people climbing in on the same side as the FEL controls. I think that was dopey because there is no step on that side. Problem solved. I use that handle all the time now that I have it.
P/n 34670-29440
https://www.messicks.com/part/34670-29440/handle
One of the first parts I bought for my L35
https://www.messicks.com/part/34670-29440/handle
One of the first parts I bought for my L35
Mainah
New member
Lifetime Member
Equipment
L2501HST, BLMX3164 blower, BB1266 box blade, BX42S chipper, Titan forks
I put one on my L2501 and I really like it and use it all the time. The tractor looks better too imho.
BTDT with my L6060 ROPS.
I bought a right side handle for, IIRC, an L4700 (??). It was necessary to modify it by cutting away some of the plastic from the front/inside to provide clearance for the plastic "console" on my 6060 but all else was bolt on.
Interestingly, my dealer had the handle in stock, telling me that many owners buy one for the right side of their tractors.
SDT
BINGO!
This is exactly why you will not find right side steps on ROPS model tractors from most (all ?) manufacturers.
Once again, the plaintiff's bar has inconvenienced all of us for the sake of legal fees.
SDT, who is, among other things, an attorney and knows how the legal system works.
Just got off the phone ordering RH Fender Handle from Messicks,outstanding customer service rep. "Big Orange" will get a new part and I will be able to stop grabbing the edge of the fender !
Just called Messicks and had them hold one for my L3800, will pick up Friday. Thanks for the part number, I am constantly looking at the right side and wishing they would have come from the factory with one. Part was ~$48 with 2 locking nuts.
Last edited:
GSPKurt
New member
Lifetime Member
Equipment
Kubota L3301 HST, LP 2072 Cutter, 55" Root Rake/Grapple, Stump Bucket