I have read where several of you'll have the right side fender handle on you L3200 & 3800s does anyone know the part number? Also is there one available for the L3400-3700 series tractors? Thanks
right fenger handle
- Thread starter Sammy3700
- Start date
CaveCreekRay
Well-known member
Lifetime Member
Equipment
L3800 HST, KingKutter box scraper, KingKutter 66" rake, County Pride Subsoiler
Sammy,
I went back through the threads and couldn't find the one discussing that...
Yup, I bought the right hand handle for my 3800. It was from the next bigger series... I wanna say a Grand. All the handles are the same bolt pattern I believe You just want to get the right-hand handle. I'll dig through my paperwork and see if I can get the ser #.
Ran about $60 for the handle and the two nuts that hold it on. You have to bend it open a tad to get it through the holes. Dopey that they don't come on the tractor to start with.
Ray
I went back through the threads and couldn't find the one discussing that...
Yup, I bought the right hand handle for my 3800. It was from the next bigger series... I wanna say a Grand. All the handles are the same bolt pattern I believe You just want to get the right-hand handle. I'll dig through my paperwork and see if I can get the ser #.
Ran about $60 for the handle and the two nuts that hold it on. You have to bend it open a tad to get it through the holes. Dopey that they don't come on the tractor to start with.
Ray
I just bought and installed mine yesterday.
Right Side Fender Grab Handle part # T1060-29450 $40.00 at the Palmyra In. dealer, he had 2 in stock.
I added a couple of nylock nuts and washers. Mine was put on an L4600 and I had one existing hole with an Orange plastic plug and I had to drill the second hole. Worked great !!
Right Side Fender Grab Handle part # T1060-29450 $40.00 at the Palmyra In. dealer, he had 2 in stock.
I added a couple of nylock nuts and washers. Mine was put on an L4600 and I had one existing hole with an Orange plastic plug and I had to drill the second hole. Worked great !!
I just got back from picking up my handle and it was the same part number as RIDETOEAT has. It was $40.47, but my dealer had to order. All I had to do was take the plastic plugs out and put the handle in. I did notice that I had to put the top bolt in first and then the bottom.
Attachments
Last edited: