Replacement valve Husco 9210-B12
- Thread starter dmflying
- Start date
Just replaced a Husco 9210 with a Vevor. Local hydraulic shop didn’t think a Husco was worth their time. You need to know if your valve is open center or closed and if you need a power beyond port. You can find that by going to Husco‘s website. Should give you flow etc to match up a replacement. Might need some new adaptors to fit your existing hoses to the new valve. There seem to be several standard types of fittings.
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Chuck it and retrofit something like this:
Hydraulic Directional Control Valve for Tractor Loader w/ Joystick, 2 Spool (Single Float Spool Optional), 11 GPM
FREE SHIPPING This Monoblock Hydraulic Directional Control Valve uses a Joystick, 2 Spools and has a capacity of 11 GPM. These valves are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.
summit-hydraulics.com
Dan
LOL i like chuck itChuck it and retrofit something like this:
Hydraulic Directional Control Valve for Tractor Loader w/ Joystick, 2 Spool (Single Float Spool Optional), 11 GPM
FREE SHIPPING This Monoblock Hydraulic Directional Control Valve uses a Joystick, 2 Spools and has a capacity of 11 GPM. These valves are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.
Dan
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
They "make" nothing Dan, they pull stuff out of all the Chinese factories, slap a sticker on it, and sell it with unbelievable marketing. You never heard of them 2 years ago, now it's EVERYWHERE. I swear it's an arm of the CCPAnd they seemingly make everything
Dan
fried1765
Well-known member
Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Yup.....They "make" nothing Dan, they pull stuff out of all the Chinese factories, slap a sticker on it, and sell it with unbelievable marketing. You never heard of them 2 years ago, now it's EVERYWHERE. I swear it's an arm of the CCP
In China/Asia there may be 50 or more (little?) "factories" cranking out the same or similar product.
Quality received here is often a total crap shoot!
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
I am sorry to hear that, even if you get refunded that hassle to find out it's bad is something you'll never recoup.
Try a Prince or Bucher valve next, both are excellent.