Removing lever grips

BlueRidgeRunner

New member

Equipment
Bx2360
Jul 19, 2024
4
1
3
Blue Ridge GA
Hi,

Looking to replace the weathered lever grips on my bx2360. Tried heating them up with a hair dryer but they would not budge. Thinking I will need to cut them off. Anyone know how they are attached?
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,664
5,047
113
Greensville,Ontario,Canada
Yellow PTO ones (left side) are push on fit. I used an open end wrench,whack the face,POP off the cover...then spend 10 minutes looking for it in garage.........good thing it's yellow !
The only tricky one is the 3PH valve, hard plastic, 5" long. It's held on by an internal rollpin. Rotate 90* then it'll come off.worst case, $10 to replace. BTDT.