Removing BX24 3PH Speed and Mower Height Knobs

[GlueGuy]

I need to replace the rear fender assembly on my BX24. Everything is fairly straight forward, but how do the 3PH speed control and mower height knobs come off?

Thanks,

 

[RCW]

Re: Removing BX24 3PH Speed and Mower Hgeight Knobs

I think they just pull off. Might be a little tough, and some heat might help, like from a heat gun!

 

[cerlawson]

Ya they pull off, but much easier if you warm them up. I used a hair dryer. makes a heck of a difference.

 

[GlueGuy]

Thanks Guys, We'll try the heatgun!

Jim

 

[ipz2222]

When all else fails,, get a bigger hammer..

 

[GlueGuy]

You guys were correct! A heat gun for a minute or two and they came off. Still a tight fit! Will put them back on with some heat as well to try and reactivate the adhesive Kubota used.

Thanks!