Redneck shade?

i7win7

Well-known member

Equipment
BX2370, B2650 grapple, tree puller, trailer mover, 3 point hoist, mower, tiller
Feb 21, 2020
3,379
3,982
113
Central, IL
Maybe this belongs in daily chuckle :)

Messing around with golf umbrella, not ready for prime time. Need U bolts and longer board. Spins nice if you get to close tree limb.
20200708_161216.jpg

20200708_161204.jpg
 
  • Like
  • Haha
Reactions: 4 users

MFFI422

Member

Equipment
BX2380 -Drive Over Mower Deck- LP Tiller - FEL - LP Box Blade - LP QH - Canopy
Jun 10, 2020
81
35
18
Arkansas
It works!
 
  • Like
Reactions: 1 user

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,249
6,405
113
Sandpoint, ID
Curious, why the wood block to hold up the ROPS at the 90 degree angle?
 
  • Like
Reactions: 1 user

i7win7

Well-known member

Equipment
BX2370, B2650 grapple, tree puller, trailer mover, 3 point hoist, mower, tiller
Feb 21, 2020
3,379
3,982
113
Central, IL
Curious, why the wood block to hold up the ROPS at the 90 degree angle?
Shoulder injury, takes less horse power :) to raise it. Need low enough to enter garage and high enough not to bang head too often.
 
  • Like
Reactions: 1 user

MFFI422

Member

Equipment
BX2380 -Drive Over Mower Deck- LP Tiller - FEL - LP Box Blade - LP QH - Canopy
Jun 10, 2020
81
35
18
Arkansas
Shoulder injury, takes less horse power :) to raise it. Need low enough to enter garage and high enough not to bang head too often.
Speaking of ROPS. Is it pretty easy to fold down? Will it fold down towards the rear? Will if fold down with an attached factory canopy? Thanks guys
 

i7win7

Well-known member

Equipment
BX2370, B2650 grapple, tree puller, trailer mover, 3 point hoist, mower, tiller
Feb 21, 2020
3,379
3,982
113
Central, IL
Speaking of ROPS. Is it pretty easy to fold down?
Yes, you may need to loosen pivot bolts

Will it fold down towards the rear?
Yes, If you look at 1st picture I have a SPAX lag bolt in the hole where the pin goes for storage position.

Will if fold down with an attached factory canopy? Thanks guys
I suppose it depends on canopy. Definitely make it damn hard to raise back up.