Rear Tire Chains on L-48

skles

New member

Equipment
L-48 B3200
Jan 27, 2016
5
0
0
Mishicot Wi. USA
I have a newer L-48 ~2008 ....I live in Wisconsin and we got snow. I have trouble on any slight grade ...turf tires.....there does not seem to be any room for rear tire chains....but every one will sell you some. Can it be done ??
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,548
6,599
113
Sandpoint, ID
Get wheel spacers, look on EBay. ;)

L48 with turf tires?????
Post a picture of it!
What size tires are they???
 

Grouse Feathers

New member
Lifetime Member

Equipment
BX2370, FEL, Snowblower-BX5455, Homebuilt Forks, LP RB1560, LP GS1548
Feb 16, 2015
1,022
10
0
Lovells, Mi
Turf tires give good snow traction, what are you doing and how big is the implement when you are having trouble?
 

Billdog350

Member

Equipment
Kubota L3710 HST,L2230A QT,forks,Takeuchi TB125, 60" Luck Now pto Snowblower
Jan 6, 2014
468
10
18
East Hampton, CT
Get wheel spacers, look on EBay. ;)

L48 with turf tires?????
Post a picture of it!
What size tires are they???
Agreed, never seen an L48 with turfs! Yes you will need spacers as Wolfman states or you can flip the rims to the outside of the hubs if you have a 2 piece rim assembly. When you flip the rims out you will swap left to right keeping tires pointed in the right direction and put the rims on from the outside rather than inside.

Look for Canadian logger chains http://www.canadianchainsusa.com/Inventory/Category/1326/

The studded ones are SERIOUS and will work great in snow, ice, whatever.
 

Billdog350

Member

Equipment
Kubota L3710 HST,L2230A QT,forks,Takeuchi TB125, 60" Luck Now pto Snowblower
Jan 6, 2014
468
10
18
East Hampton, CT
You should be able to swap those tires left to right and put them on the outside of the inner hub and gain more width.....
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,548
6,599
113
Sandpoint, ID
You should be able to swap those tires left to right and put them on the outside of the inner hub and gain more width.....
Billdog,
You should note that they are 2 piece rims (center is removable) and look in second pic, they are already dished in and on the inside of the loops on the outer rim.
So no way to make it any wider without adding axle spacers. ;)
 

Billdog350

Member

Equipment
Kubota L3710 HST,L2230A QT,forks,Takeuchi TB125, 60" Luck Now pto Snowblower
Jan 6, 2014
468
10
18
East Hampton, CT
Wolfman, it seems you're right! I know the R4's have decent clearance when the rims are flipped to the outside so I was assuming that those on the L48 above still needed to be flipped to the "deeper" side of the rim, but alas it appears spacers are needed!