Rear remotes

[OldcrowP51]

I looking to add a 3 spool hydraulic valve (tandom center) for rear remotes on my Kubota L3901.
The valves I see have a relief valve on them.
I am wondering if this is needed as I would add this valve to the power beyond port of the open center system which is regulated pressure.
If I understand right there should be constant flow through this manual valve.
Thank you

 

[TheOldHokie]

I looking to add a 3 spool hydraulic valve (tandom center) for rear remotes on my Kubota L3901.
The valves I see have a relief valve on them.
I am wondering if this is needed as I would add this valve to the power beyond port of the open center system which is regulated pressure.
If I understand right there should be constant flow through this manual valve.
Thank you

You dont need a relief valve but it wont hurt anything.

You do need a valve with both tank and power beyond ports.

Dan

 

[MtnViewRanch]

I'm curious, how and where are you thinking of mounting the valves and couplers?

 

[OldcrowP51]

You dont need a relief valve but it wont hurt anything.

You do need a valve with both tank and power beyond ports.

Dan

Are you saying there will be one infeed line to the valve and two discharge lines?

 

[TheOldHokie]

Are you saying there will be one indeed line to the valve and two discharge lines?

Yes