Re: Scans Of 185 Labels

[billrigsby]

Re: Scans Of 185 Labels

Russell, I wonder if you can help, I for the life of me
can not figure out where these two labels are supposed to go....

Bill,
Your pictures did not come through so I don't know which two you are having trouble with.

Try one at a time or post in the thread and I will be happy to try and help

Russell


Sent from my iPad using Tapatalk

Here are the photos again............

 

[whitetiger]

Re: Scans Of 185 Labels

The Hazard decal goes below or beside the hazard light switch. Tire pressure decal, I am coming up blank on.

 

[Russell King]

Re: Scans Of 185 Labels

I assume whitetiger is correct. All I can see on the 35320-31840 is it is on the dash near a switch. Makes sense that it is the hazard switch if you have one. I don't have any of the hazard lights or switch on my tractor.

The other label 35110-27800 (or 35110-27803) goes on the right hand fender top. There are three labels that are there. A larger label (35110-34910) for safe operations, a smaller label (35110-34930) that is also safe operations and then this label (35110-27800).
The large label is by itself and the other two are stacked one over the other placed to the right of the large label. The air pressure below the 35110-34930.

Sort of like this:
---------------35110-34930
35110-34910
---------------35110-27800



Sent from my iPad using Tapatalk

 

[billrigsby]

Re: Scans Of 185 Labels

Thanks guys, I think I have them pretty close
without being at home to confirm.

I do not have hazards, just turn signals
so I need the L-R Arrow decal, which I can not find.

 

[Russell King]

Re: Scans Of 185 Labels

Use two triangles one points right the other left


Sent from my iPad using Tapatalk

 

[billrigsby]

Re: Scans Of 185 Labels

Use two triangles one points right the other left

OH - NO NO

Should be a dual arrow label, I will have to make one

 

[Russell King]

Re: Scans Of 185 Labels

OH - NO NO



Should be a dual arrow label, I will have to make one

[/kQUOTE]

Fixate very much??

I feel your pain


Sent from my iPad using Tapatalk

 

[xmikew]

Re: Scans Of 185 Labels

Bill did you abandon ship on l1500 stickers or this a different tractor?


Sent from my iPhone using Tapatalk

 

[billrigsby]

Re: Scans Of 185 Labels

Bill did you abandon ship on l1500 stickers or this a different tractor?


Sent from my iPhone using Tapatalk

Yes unfortunately I did, I had someone in Japan check with the local Kubota dealer and apparently nothing is available.

 

[xmikew]

Re: Scans Of 185 Labels

Yes unfortunately I did, I had someone in Japan check with the local Kubota dealer and apparently nothing is available.

Good to know. I was planning on going that route as well when the time came but seems it will be a dead end.

 

[billrigsby]

Re: Scans Of 185 Labels

Fixate very much??

I feel your pain

TOO MUCH,

 

[jkk04]

Re: Scans Of 185 Labels

OH - NO NO

Should be a dual arrow label, I will have to make one

Hello, Bill!
I am wondering where you got the turn signal knob and screws.
Thank you
Jkk

 

[billrigsby]

Re: Scans Of 185 Labels

Hello, Bill!
I am wondering where you got the turn signal knob and screws.

Well actually that's not a picture of my Dash,
that's just an example of what the label should
look like. But I do have the knob and those screws,
the knob was on the tractor when I bought it,
and the screws I just got at the local hardware store.
Just standard metric hardware,
Unfortunately they did not have them in stainless
steel like most everything else I used. I'm sure I
could find them in stainless on line though.

 

[jkk04]

Re: Scans Of 185 Labels

Well actually that's not a picture of my Dash,
that's just an example of what the label should
look like. But I do have the knob and those screws,
the knob was on the tractor when I bought it,
and the screws I just got at the local hardware store.
Just standard metric hardware,
Unfortunately they did not have them in stainless
steel like most everything else I used. I'm sure I
could find them in stainless on line though.

I thought the tractor in the picture was yours because
I went through your facebook site and saw your tractor looks like almost brand new.
Thank you anyway.
have wonderful day
Jkk