RCK60-24B gearbox spindle

[Dunslandloy]

I have a RCK60-24B mower on my B2400. I have to replace the gearbox seals due to a leaking bottom seal and was going to do the bearings as well. Is there only one bearing in each spindle? It looks like there is room for two bearings in the spindle housing but mine has only one,

 

[Rusty46]

There are (3) bearings, (2) bearings on the horizontal shaft and (1) bearing on the vertical shaft. A second bearing for the vertical shaft is below the gearbox & pully inside the spindle housing.

Here are (2) Y-Tube videos that may be of help.

Exploded view, part numbers and prices are available at

Messicks | The Equipment Parts, Sales & Service Experts

Tractor & Equipment Parts, Sales & Service Since 1952. New Holland, Case IH, Kubota & More

www.messicks.com

 

[Dunslandloy]

Does the bearing in the spindle come out of bottom or top of deck spindle? I see a large internal snap ring above the bearing.

 

[Rusty46]

"Does the bearing in the spindle come out of bottom or top of deck spindle? I see a large internal snap ring above the bearing."

Sorry, I can't help you with that question. The bearing below the gear box is not pressed onto the shaft. It stays in the spindle housing when the gearbox with shaft is removed. I have not removed this bearing.

 

[pigdoc]

The large internal snap rings retain the bearings in their proper place.

You need a Parts List to understand how everything is assembled.
Here it is:

Kubota RCK60-24B (MID-MOUNT FINISHING MOWER) Parts Diagrams

Kubota Parts Catalog Lookup. Buy Kubota Parts Online & Save!

www.messicks.com

-Paul

 

[Dunslandloy]

"Does the bearing in the spindle come out of bottom or top of deck spindle? I see a large internal snap ring above the bearing."

Sorry, I can't help you with that question. The bearing below the gear box is not pressed onto the shaft. It stays in the spindle housing when the gearbox with shaft is removed. I have not removed this bearing.

Ok. Thanks Rusty.