Looking for a rear axle for a R400 wheel loader . Diff. housing on my tractor is now mostly shrapnel . Complete axle or center unit is needed to save my little Kubota monster . Anyone.....please , let me know. Kubota Ken
R400 rear axle
- Thread starter Kenneth Rakoski
- Start date
Which axle is bad on your machine ?been looking for one for a year, found some parts overseas but not much luck in the states.looking for a rin
g gear but discontinued. most parts for them are. if you part it out let me knowbeen looking for one for a year, found some parts overseas but not much luck in the states.looking for a ring gear but discontinued. most parts for them are. if you part it out let me know
rear, machine was a freebie in good shape otherwise but rear axle the center diff was cracked, almost split really so started looking for a rear but no luck. then i took it out opened it up wow looked like a bomb went off ring and pinion were tore up.they ran it without fluid. the front is the same housing and ring and pinion part number only thing different is the rear has the wet brakes in the outer half shafts which im told will bolt right up. and it figures they only made this model for limited time they didnt sell well in the states,then went to the 410 which is totally different. if i could find a center section from a front id give it a try
talked to a few people that had them was told was endemic to these models the rear splitting. believe they went to a heavy casting with different part number. dont know if it was because people used the backhoe without the outriggers and the breakout force caused it or poor design and weak casting
Tree work . Not the first time I used it hard , but not abused ! This machine impresses me every time I use it !