Quik Tach bucket

[RalphVa]

Decided that I need to remove the bucket for when I back into the carriage house basement to pick up the box blade. I've gashes in both doors now from the tips of the bucket.

Do I just lift up those 2 long latches at the back of the FEL bucket to release it?

Then just lower and loose?

Reverse to reconnect?

Thanks.

Previously had smaller gashes in the doors from when I first got my 4010 and learned not to try to maneuver while in the doorway.

Ralph

 

[GreensvilleJay]

yes, usually you need to 'curl' the bucket forward a bit, then lower, then BACK away..... don't ask

 

[OrangeKrush]

Just keep bucket level with the ground (bottom of bucket & ground parallel) just hovering above ground release the two levers. Then lower the bucket slowly to ground, once down you may be able to see the top of QA points drop below the pockets they rest in. You can curl forward or downward just a tad and back out.

Once you do this you'll kick yourself for not doing it sooner! My neighbor was not sure and was mowing his yard with his on until I went over and showed him how easy it was. You got this!