Since I have no idea what it is called, you know that thing that uncouples all 4 of the hydraulic couplers for the FEL. Well I was wondering if anybody makes a 2 coupler thing like that for the 3rd function for the grapple.. You know pull the little red pin lift the arm and you are good to go. Yeah I know the quick couples are ,,,, quick, but I was thinkin of sumthin quicker
Quick coupler
- Thread starter skeets
- Start date
I have mine setup with flat face 3/8' couplers never have had issues with hooking them not sure a single point lever would really save any time to speak of you have to wipe off the face no matter what you use just to help keep the fluid clean.
Most people call them "single point hydraulic couplers" or SPHC for short, or the brand name "Multifaster" couplers.
Faster makes them in many configurations:
www.fastercouplings.com
They are very expensive! I just sold two of the 2-ports ones to a customer, these where the implement half (or 'mobile' side as Faster calls it) only, they where $200 each-and trust me I made peanuts on them.
So, by the time you bought both halves, and some fittings, you'd be in the $500 range as I remember.
Faster makes them in many configurations:
Faster | MultiFaster | Multiconnections
www.fastercouplings.com
They are very expensive! I just sold two of the 2-ports ones to a customer, these where the implement half (or 'mobile' side as Faster calls it) only, they where $200 each-and trust me I made peanuts on them.
So, by the time you bought both halves, and some fittings, you'd be in the $500 range as I remember.