Quick connect query

O

OsakaDon

New member

Equipment
Kubota L3901
Apr 18, 2026
1
0
1
Eugene Oregon
I have taken my loader off and on several times with no issue. Today the Red and Yellow lines would not reconnect. I cleaned them thoroughly, released pressure everywhere to no avail. Then I took the male and female fittings off, inspected and cleaned them again. They will still not go back together. No damage is visible and they slide together smoothly until the last quarter inch, but no further. Any Ideas out there?
 
J

jimh406

Well-known member
Lifetime Member

Equipment
Kubota L2501 with R4 tires
Jan 29, 2021
2,877
2,292
113
Western MT
Temperature can impact the pressure. Try in the the AM. I assume you went every direction for your lever. Other than that, you can barely crack the lines. Keep hands out of the way.
 
  • Like
Reactions: 1 user
TheOldHokie

TheOldHokie

Well-known member
Lifetime Member

Equipment
L3901/LA525, G2160/RCK60, G2460/RCK60
Apr 6, 2021
11,868
6,750
113
Myersville, MD
windyridgefarm.us
OsakaDon said:
I have taken my loader off and on several times with no issue. Today the Red and Yellow lines would not reconnect. I cleaned them thoroughly, released pressure everywhere to no avail. Then I took the male and female fittings off, inspected and cleaned them again. They will still not go back together. No damage is visible and they slide together smoothly until the last quarter inch, but no further. Any Ideas out there?
Click to expand...
Would they lock together when you had them removed?

Dan
 
You must log in or register to reply here.

Top Bottom