PTO question

[garyf]

Hi and thanks for taking the time to read my question(s)
I may have the opportunity to purchase a B7200 4wheel drive CUT
it is not the hydrostatic model. It has a belly mower (60") that is non Kubota. I think it was a continental. It runs off a 180 degree shaft from the PTO to a gear box in the center of the deck then to the 3 blades via a heavy belt. There are no guage wheels and the raising and lowering is via the 3-point.
I have a couple older MF AG tractors 2 of them have a dual clutch one has independant PTO. Is the clutch on the B7200 single stage or dual do I need to clutch to get the PTO to run?...Gary

 

[dusty-t]

I have a B7200 hydro and it only has a single stage clutch and you have to push the clutch all the way in to engage the pto. I'm pretty sure that with a two stage clutch if you push the clutch pedal half way in the tractor will stop but the pto will keep running.

 

[garyf]

Thanks Dusty...I guess the hydros must have some type of independent PTO so that you don't have to clutch to engage the rear PTO. 2 of my MF's have dual clutch which works the way you say. I don't think this b7200 is for me...Gary