often when lifting the BH boom it out of control drops. I suspect a pressure relief valve in the control body. Any ideas or suggestions and does anyone make an after market relief valve.
pressure relief valve on L48 backhoe attachment
- Thread starter Covenantllc
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Get the WSM for BT1100 it it will show all the details.
You'll need the Serial Number of the BH in order to get the right parts.
You won't find and aftermarket valve for it that's going to fit like the OEM.
Looks like the OEM for the valves pressure relief assemblies are not too expensive.
You'll need the Serial Number of the BH in order to get the right parts.
You won't find and aftermarket valve for it that's going to fit like the OEM.
Looks like the OEM for the valves pressure relief assemblies are not too expensive.