Power steering line replacment on a L4060

[rjr8806]

Hi,

While cutting firewood today I had a log that damaged the power steering line. The damage is right at the back valve so repairing the line with a piece of high pressure hose will not be a viable option. Has anyone figured out an easy way to remove the entire power steering line on a L4060. I just can't see a way to thread it through.

Thanks

 

[Pau7220]

I'm not familiar with your machine for removal. But that looks like a nice clean break at a factory braze, unless its crushed further back. Any chance it can be cleaned up and rebrazed on the machine?