Plow seasons a coming

[bandaidmd]

Found a deal on a curtis cab plow so let it snow im ready.

Sent from my SM-N900V using Tapatalk

 

[skeets]

MAMA,,,MAMA,,, that man said the "S" word

 

[KenB2920]

Excellent Setup. !!

 

[BX25DMan]

That's a nice setup you have there. I want to do something similar on by BX25 but need to add a 3rd function valve to control the blade angle.

 

[BAP]

Looks like a great find. I made one similar for my B2920 a couple years ago out of an old Fisher snow plow. It works great especially being able to change the angle.

 

[alansz400]

Not fancy but should push snow. Paint before winter hopefully.

 

[Lil Foot]

I have a Curtis also. Beefy units.

 

[jb62901]

I am about to cab up, plow an blower the middle of this month.

 

[PHPaul]

At the moment, the maintenance bay of my garage is full of little projects. If everything goes according to plan (Hah!...) they'll all be gone in a week and I can get the Pronovost out of the back of the barn and prep it.

Mostly what it needs is some sanding, priming and touchup paint.

 

[joesco]

At the moment, the maintenance bay of my garage is full of little projects. If everything goes according to plan (Hah!...) they'll all be gone in a week and I can get the Pronovost out of the back of the barn and prep it.

Mostly what it needs is some sanding, priming and touchup paint.

What are you folks using for pins for your snow plows. My recently acquired Curtis 7.5' plow attaches to my loader arms, but my local Kubota dealer said I must use a greasable pin. My existing bucket greaseable pins are not compatible with the plow's frame. Any help would be greatly appreciated. Thanks!

Sent from my Lenovo A5500-F using Tapatalk

 

[skeets]

About the only thing I have done with my plow so far this winter is back drag the driveway

 

[bandaidmd]

What are you folks using for pins for your snow plows. My recently acquired Curtis 7.5' plow attaches to my loader arms, but my local Kubota dealer said I must use a greasable pin. My existing bucket greaseable pins are not compatible with the plow's frame. Any help would be greatly appreciated. Thanks!

Sent from my Lenovo A5500-F using Tapatalk

mine is mounted to a ssqa plate so the pivot pins are stock greaseable kubota


Sent from my SM-N920V using Tapatalk