I have a 84" plow on my Kubota l3301, similar to this one but slightly larger
It goes off level in both directions when I angle it. This is
a real pain as I have a 2000 ft long gravel driveway. I have been keeping it a bit high to avoid digging in
on the first pass and then reducing the blade angle and making a second or third pass. Seems like this is just
the geometry of the blade pivot. Loader arms are square and level and so is the snow blade when it is
perpendicular to the tractor. Any ideas?
Hydraulic 79" Skid Steer Dozer Blade / Snow Pusher
The 79" Hydraulic Snow Blade from Titan Attachments is ideal for handling snow with your skid steer or tractor.
www.palletforks.com
a real pain as I have a 2000 ft long gravel driveway. I have been keeping it a bit high to avoid digging in
on the first pass and then reducing the blade angle and making a second or third pass. Seems like this is just
the geometry of the blade pivot. Loader arms are square and level and so is the snow blade when it is
perpendicular to the tractor. Any ideas?