Piranha Tooth Bar Safety Guard

retiree-urgency abandoned

Member

Equipment
B3350, Kub. 5" rotary cutter, LP 48" forks, Titan Aerial Platform, KK XB Dump
Dec 1, 2020
55
54
18
Bloomington, IN
Just got my tooth bar from BXpanded. So far do good, After reading all of the posts about various body parts snagged on Piranhas, I decided to make a safety guard as a preemptive measure. Since I tend to keep bits & pieces around, I had a short section of corrugated drain tile lying around. Slit it lengthwise and it slips snugly over the sharp edges when I'm parking it in the barn.
 

Attachments

  • Like
Reactions: 1 user

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,745
2,551
113
Bedford - VA
I find that if I place the bucket down and curl it up a bit ........... my shins remind me to never park it that way again!
 
  • Like
  • Haha
Reactions: 3 users

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,516
2,547
113
Peoria, AZ
Did the same thing with 2 1/2" pvc:
IMG_0001 4.11.41 PM 4.11.41 PM.JPG
 
  • Like
Reactions: 1 user

Mark_BX25D

Well-known member

Equipment
Bx25D
Jul 19, 2020
1,753
1,276
113
Virginia
Hmmm. Some good ideas. I have one, but hadn't thought of a protector like that. I tend to park it with the bucket pointing down, so the Piranha isn't a danger.

But there's probably a reason I shouldn't do that.....
 

OrangeKrush

Well-known member

Equipment
BX2680, LA344 with Piranha tooth bar, LP PF 1242, LP Rear Blade, KK 60" BB
Nov 15, 2020
1,047
515
113
Indy
I always set it flat against the concrete floor so when I or my dog walks by there's no chance of snagging a sharp edge. But that is a good safe guard!👍
 
  • Like
Reactions: 2 users

DVR

Active member
Premium Member

Equipment
Kubota MX5400, L3560LE, L3301. KX033-4
May 8, 2020
111
66
28
Columbia, SC
Hmmm. Some good ideas. I have one, but hadn't thought of a protector like that. I tend to park it with the bucket pointing down, so the Piranha isn't a danger.

But there's probably a reason I shouldn't do that.....
I do the same. My piranha toothbar works the same as when it was new and has suffered no ill effects.

Nice ideas but it's a solution to a problem that doesn't exist (for me). Can see where it would be good when someone is loading the bucket with firewood, trash or debris. However, I have two identical buckets. One without so I use it for those types of things.
 

Quick

Active member

Equipment
B2601, LA435, BH70, LP SGC0554 Grapple, LP RB1672 Rear Blade, King Kutter 60" BB
Sep 23, 2021
142
249
43
St. Clair, MO.
Have the same tooth bar and it rocks. Always lay it flat on the ground when not in the seat. (-;
 

Mlarv

Active member

Equipment
BX23S
Jan 19, 2020
227
177
43
Crossville TN
My tractor spends time in and out of the garage. When ever I park it I roll the bucket down a bit then lower it to the ground. This way if outside no water sits in the bucket, or if in the garage I don't walk into it.
 

Mark_BX25D

Well-known member

Equipment
Bx25D
Jul 19, 2020
1,753
1,276
113
Virginia
My tractor spends time in and out of the garage. When ever I park it I roll the bucket down a bit then lower it to the ground. This way if outside no water sits in the bucket, or if in the garage I don't walk into it.

Exactly. Well, except for me, there's no garage!
 

The Evil Twin

Well-known member

Equipment
L2501, LA526,
Jul 19, 2022
2,815
2,826
113
Virginia
Did the same thing with 2 1/2" pvc:
View attachment 84674
That could also double as a driveway protector for snow removal. The guy that clears my parents driveway puts one on his track loader every winter. I thought it was genius. I think he used 2" and notched for the teeth. Never a scrape on their asphalt.
 
  • Like
Reactions: 1 user

Mark_BX25D

Well-known member

Equipment
Bx25D
Jul 19, 2020
1,753
1,276
113
Virginia
That could also double as a driveway protector for snow removal. The guy that clears my parents driveway puts one on his track loader every winter. I thought it was genius. I think he used 2" and notched for the teeth. Never a scrape on their asphalt.

There's a guy on YouTube who shows that, not on a bucket, just on his front mounted snowblower. Keeps it from picking up gravel.
 
  • Like
Reactions: 1 user

Henro

Well-known member

Equipment
B2910, BX2200, KX41-2V mini Ex., Beer fridge
May 24, 2019
5,781
2,965
113
North of Pittsburgh PA
LOL.

With my luck I would trip on the ends sticking out beyond the loader and break my neck!
 
  • Haha
Reactions: 1 users

OrangeKrush

Well-known member

Equipment
BX2680, LA344 with Piranha tooth bar, LP PF 1242, LP Rear Blade, KK 60" BB
Nov 15, 2020
1,047
515
113
Indy
LOL.

With my luck I would trip on the ends sticking out beyond the loader and break my neck!
They come in adjustable lengths.. 😁
 

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,237
4,816
113
North East CT
My bucket doesn't have teeth, and if it did, they would be plastic held in with
Dental Adhesive i.e. Polident :rolleyes:
 
  • Haha
Reactions: 1 user

CGMKCM

Active member

Equipment
RVT-1100C, ZD323, L4760
Jan 26, 2021
411
199
43
Randolph county N.C.
IMO a solution in search of a problem. Pointy sharpy things should be on the ground to avoid injuries.
 
  • Like
Reactions: 1 users