I've just about decided to get a Phoenix T-4 Series, 40" Offset Tiller from Everything Attachments.com. It's small but my b7100 can't handle much more. If anyone has experience with this model or with the company Everything Attachments.com, please help me avoid a $1500 mistake. (delivery is free to my location)
http://www.everythingattachments.co...-Tractor-Tiller-p/ph-tiller-rotary-t4-40k.htm
PJ
pjesper,
I can't speak about the Phoenix, but I have a 48" rear tiller from Kubota that serves me VERY well. I have about a 1/4 acre garden here that in mostly clay and rock.
(anything from 2" size to as big as your head) I keep the engine rpm about 2,000 and sink it in as far as it will EASILY turn up the soil. After 9 years here, I can put it down ALL the way (with the depth shoes removed) and turn over to about 8" or 9" deep. The way rocks GROW
here, I will continue to have them come up. I just toss them into the FEL and keep going. Usually get about 2 buckets full each year. If the pto shaft has a slip clutch, you will have to keep the rpm UP to keep tilling. If it has shear pins, I would suggest that you get a BOX of bolts and nuts to keep on the tractor for faster replacement. Mine takes a 5/16" X 2 1/2" grade 5 bolt. In the 6 years I have had the tiller, I have used maybe 20 shear pins.
Yes, the BIG rocks still keep growing here.
If there is any more info I can provide, please send me a P.M. or e-mail at
silentkingfisher42@centurytel.net and I will answer asap. Good luck on your purchase.
Dave