Looks like they are pretty versatile setup. I like the safety cage idea, but your tractor is a lot bigger than mine.
Pallet forks would be helpful
- Thread starter JeremyBX2200
- Start date
Yeah but still id recommend. Mine is L4060 but your at 22hp. I hate buying a single use item. The snow blade is because ill sit my old butt in the heat and cab. Im sure you could find a lot of uses to. Bang for your buck. I also have tongs instead of a grapple to move logs.
Attachments
xrocketengineer
Well-known member
Lifetime Member
Equipment
BX1880, FEL, Grapple, 36 in. Forks, 48in. MMM, Quick Spade, Ripper
I got my BX1880 with a pin on bucket because of the extra weight of the SSQA and the limited lift capability of the loader. So this is what I did:
For the adapter:
bxattachments.com
For the forks at the time a better deal:
www.redlinesystemsinc.com
I already had the SGC0548 Grapple that I bought with the tractor.
For the adapter:
Front Loader Quick Hitch Attachment - Kubota BX Quick Attach - Ai2
Front Loader Quick Hitch Attachment. Kubota BX Quick Attach will make your life easier! All we do is Kubota BX attachments. Get yours today.
bxattachments.com
For the forks at the time a better deal:
Kubota BX Tractor Pallet Forks - Pallet Fork Attachment for Kubota - Redline Systems
This pallet fork attachment for Kubota BX tractors is made in the USA by Redline Systems. Kubota pallet forks, forklift attachment.
www.redlinesystemsinc.com
I already had the SGC0548 Grapple that I bought with the tractor.
I have the Redline unit on my LX, I dig themI got my BX1880 with a pin on bucket because of the extra weight of the SSQA and the limited lift capability of the loader. So this is what I did:
For the adapter:
Front Loader Quick Hitch Attachment - Kubota BX Quick Attach - Ai2
Front Loader Quick Hitch Attachment. Kubota BX Quick Attach will make your life easier! All we do is Kubota BX attachments. Get yours today.
For the forks at the time a better deal:
Kubota BX Tractor Pallet Forks - Pallet Fork Attachment for Kubota - Redline Systems
This pallet fork attachment for Kubota BX tractors is made in the USA by Redline Systems. Kubota pallet forks, forklift attachment.
I already had the SGC0548 Grapple that I bought with the tractor.
Whoa. I think this is just what *I* need. Off to research...they make add-on grapples for forks
Pallet Fork Add-a-Grapple for Sale-Ask Tractor Mike
Pallet Fork Add-a-Grapple makes it easy to move brush, logs and limbs. Easy on and easy off for fast results. Stabilizes pallet loads.asktractormike.com
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
yeesh, that add-a-grapple weighs just over 200# so would SERIOUSLY reduce the actual 'payload' on my BX23S to where I might as well get off tractor and carry 'stuff' by hand.
It would be nice on tractors with 1000#+ loader payloads though.
It would be nice on tractors with 1000#+ loader payloads though.
I've not seen a three point setup like that, was it a kit? Looks like bolt on. I've been wanting a SSQA to 3pt with hydraulic motor so I can run them on my skid steer (post hole auger, brush mower, etc.).
A set of forks that hook over the top lip of the bucket was the first thing I built for my BX. Later on, I built a pin on frame that also has attachment points so that it also fits onto the 3-point hitch. I now have the option of using my forks on the bucket, with the frame on the loader, or with the frame on the 3-point.
I fabricated it. Plow was for UTV hung from below. I used clevis mounts to create 3 points to connect. Then made the lowering frame to get mounted the same way. Used Stabilzers I had for my old Ford Tractor. Bolted up Then Welded after checking to be sure I can still mount to the utv if I want.
That is a cool item in the picture !!!