Biker1mike
Well-known member
Equipment
B6200, Kubota 2030 Front Blade, King Cutter 60" finishing deck
Did oil, grease, filters. Fuel filter housing leaked so it was on and off a few times.
Get everything together start it up and moved it to the 'summer' spot.
Now a few days later. It starts and dies. Hmmmmm, A little longer on the glow plug and re-try. Starts, coughs and dies.
With advancing age and lack of the ability to read Japanese I put the fuel cutoff in the wrong position and ran it dry.
Visions of breaking all the possible bleed points gave me a heart ache as I am not too mechanical.
Yippie, Kubota must have had people like me in mind. Found the one bleeder and 15 minutes later I was off and running.
Had to by-pass the clutch safety by strapping it down to the front tie rod.
Hope you had a better day !
Get everything together start it up and moved it to the 'summer' spot.
Now a few days later. It starts and dies. Hmmmmm, A little longer on the glow plug and re-try. Starts, coughs and dies.
With advancing age and lack of the ability to read Japanese I put the fuel cutoff in the wrong position and ran it dry.
Visions of breaking all the possible bleed points gave me a heart ache as I am not too mechanical.
Yippie, Kubota must have had people like me in mind. Found the one bleeder and 15 minutes later I was off and running.
Had to by-pass the clutch safety by strapping it down to the front tie rod.
Hope you had a better day !