Ordering a new B2650 - 60 or 72 MMM?

Bevan175

New member

Equipment
Kubota B2650 HSDC
Aug 11, 2017
30
0
0
Ontario, Canada
OK so I have come to the conclusion that the Kubota B2650 is the machine for me. 11 acres 5 wooded. so 6 groomed to cut with limited trees. Also a 1200' drive to plow and scrape. No hills, mostly poker table flat with some contouring. Will see loader work for rocks, dirt, gardening and fire wood. Turf tires

Question is are there any reasons to get the 60 MMM over the 72? I have no storage or parking limitations. I'm not worried about taking it on and off, I like working with my equipment/toys. Just about operation and cut quality. Also the local dealer said he swaps out the blades for the Zero turn blades. Anyone hear of this swap?
 
Last edited:

GaBota

New member

Equipment
M7060 B2650
Jul 25, 2017
7
0
0
Coopers, Ga.
Congratulations Bevan on your B2650, it is a great little tractor. I have the B2650 cab with 60" MMM. I like the cut it gives and yes you can use the ZT Blades on it. They seem to give a cleaner cut and cost less to replace.
 
Last edited:

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,746
2,551
113
Bedford - VA
OK so I have come to the conclusion that the Kubota B2650 is the machine for me. 11 acres 5 wooded. so 6 groomed to cut with limited trees. Also a 1200' drive to plow and scrape. No hills, mostly poker table flat with some contouring. Will see loader work for rocks, dirt, gardening and fire wood. Turf tires

Question is are there any reasons to get the 60 MMM over the 72? I have no storage or parking limitations. I'm not worried about taking it on and off, I like working with my equipment/toys. Just about operation and cut quality. Also the local dealer said he swaps out the blades for the Zero turn blades. Anyone hear of this swap?
HOW flat is your yard.....that to me would be the question, IF flat - go bigger and knock out cutting grass quicker. IF not so flat, the 60 will cut those "humps" a little better.

He is probably talking about high lift mulching blades..... cut the grass up a little better and shoot it out better.
 

BAP

Well-known member
Lifetime Member

Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Dec 31, 2012
2,758
873
113
New Hampshire
I have a B2920 with a 60"mmm. I mow about 1-1/2 acres of lawn with many things to mow around but plenty of room. I wished I had gone with the 72" mower because then I could put on wheel spacers to widen the stance for hills. The 60" won't allow spacers to be used. The tractor has plenty of power for the bigger mower.
 

chim

Well-known member

Equipment
L4240HSTC with FEL, Ford 1210
Jan 19, 2013
2,123
1,244
113
Near Lancaster, PA, USA
Not MMM's, but whether it's under you or behind you, width is a larger factor than you'd think. I only had one MMM for a couple years right after we built, and have been using RFM's since 1992. Going from a 5 foot deck to a 6 foot deck reduced the mowing time from about 33 minutes per acre to 22.
 

Missouribound

Active member

Equipment
B2320, FEL, BOX BLADE, FINISH MOWER, QUICK HITCH
Jun 17, 2014
652
42
28
Missouri
Since you plan on using a loader why not get a rear finish mower instead of the belly mount? I can't imagine having to worry about the belly mount when using my loader. Seems like you would have double work clearing a path for the mower instead of just the width of the loader. A finish mower cuts every bit as smooth as a belly mount, it's quieter for you and there are no wind rows.....not to mention when cutting on windy days there is little to no grass blowing back in your face.
And it's much faster to remove the 3 pt mower than the belly mount.....maybe 2-3 min if you take your time.
 

BAP

Well-known member
Lifetime Member

Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Dec 31, 2012
2,758
873
113
New Hampshire
Since you plan on using a loader why not get a rear finish mower instead of the belly mount? I can't imagine having to worry about the belly mount when using my loader. Seems like you would have double work clearing a path for the mower instead of just the width of the loader. A finish mower cuts every bit as smooth as a belly mount, it's quieter for you and there are no wind rows.....not to mention when cutting on windy days there is little to no grass blowing back in your face.
And it's much faster to remove the 3 pt mower than the belly mount.....maybe 2-3 min if you take your time.
I can have my mid mount mower off in 2 minutes and back on in about 3 minutes. MMM is much easier to see what's going on and there is no wagging the tail.
 

rkidd

Active member
Lifetime Member

Equipment
B2650, FEL With QA 60"mmm, 3pt FDR1672,homemade ballast box, BB 1572 box scraper
Dec 7, 2015
743
67
28
Jefferson Ohio
I can have my mid mount mower off in 2 minutes and back on in about 3 minutes. MMM is much easier to see what's going on and there is no wagging the tail.
Same time frame here with my mmm. Love it. And I also have a land pride 72' rfm so I have plenty of experience with both.
 
Last edited:

Oliver

Active member

Equipment
L2501, JD 3520
Feb 2, 2011
540
129
43
Preston County, WV
I wished I had gone with the 72" mower because then I could put on wheel spacers to widen the stance for hills. The 60" won't allow spacers to be used. The tractor has plenty of power for the bigger mower.

I don't believe spacers work with the 72" deck.
My B2650 powers the 72" deck just fine and with 4 swivel casters it pulls right out after raising the front with the FEL.
 

NoJacketRequired

Active member

Equipment
B7510 & LA302 FEL & B2782 blower, B7510 & B2781 blower, B2410 & B2550 blower
May 25, 2016
432
68
28
Ottawa, Ontario
A couple of comments from a fellow Ontarian...
1) Don't worry about power - you'll have lots for either deck. For comparison purposes our B7510 (17 pto HP) has no trouble with a 60" triple blade MMM except mowing grass which really should be called "hay".

2) Previous posts about a 3pt hitch finishing mower are pretty much right on with my experience, with a big caveat. One needs to buy a decent finishing mower. If you can, get one with rear discharge and very robust castoring wheels. I've bent the wheel brackets more than once on a less-than-robust mower.

3) What part of the province at you in? If you get much snow at all, plowing it will quickly be revealed as a total waist of time. Several threads on this forum last winter attested to the satisfaction of snow blower owners, including me. For a long lane, go with a front-mount blower. This will likely mean you can't have the front mount blower frame and FEL in place at the same time. I take our FEL off and park it for the winter. The front-mount blower is the best thing since sliced bread - easy on the body (no more sore neck), quick enough, and it eliminates those horrid windrows on each side of the lane which, in the presence of a little wind, results in your lane drifting full of snow again.

4) I wish you much enjoyment of your rural property!