Am i correct in assuming on my recently acquired used M6-111, the transmission oil, power steering, hydraulic fluid is all in one. So front 4wd is separate, engine oil is separate, correct ? Just wanting to do a complete service, just double checking. Thanks in advance.
Oil Service on M6-111
- Thread starter Grampy5
- Start date
Yes that’s correct, depending if someone changed front axle oil if it’s original oil everything but engine oil will be Kubota UDT.
Thank you. I couldn't find it in the owners manuel or the interweb and of course the dealer wants me to bring it in. I just wanted to verify. Thank you again.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Get the WSM (aka service manual) so you know where all the drains are located, there is more than one.
whitetiger
Moderator
Staff member
Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
DO NOT PUT UDT IN THE ENGINE!!!!!!!!!!!!!
The engine requires engine oil.
The front axle requires UDT, SUDT2, or 80/90.
The transmission-rear axle-power steering-hydraulic oil requires UDT or preferably SUDT2.
BAP
Well-known member
Lifetime Member
Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Reread your owners manual. Kubota does do a pretty decent job with pictures and arrows pointing to the drain plugs, dipstick and fill points for the various fluids. Also they have charts that tell fluid types used and quantities plus the service intervals.