oil change
- Thread starter Love my BX24
- Start date
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
If you didn't change anything else you could probably put that old oil back in and it would run fine!!! 
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Most Kubotas have an oil monitoring facility built in. It takes the newly installed oil and tests it in a miniature processing plant inside the oil pan.
If you put in substandard oil, the whole machine shuts down until engineers from Japan come and reset it.
If you put in substandard oil, the whole machine shuts down until engineers from Japan come and reset it.
Won't Crank/Turn Over (starter does not spin engine) or won't 'Start' (Engine will not fire and run)?
X2 on the levers. Check your PTO lever. I often catch mine with the hammer loop on my coveralls when getting off the tractor, and if the tractor is not running when it happens, I don't realize it.
Tim
Tim