Off center zerk

[Elliott in GA]

Just buy the Lock and Lube Quick Coupler equipped hose with standard head. When you need it, you lock on to it. I need it for the wheels on my finish mower.

Quick-Connect Grease Hose Adaptor

Access hard-to-reach grease fittings with this 12" extension hose. Includes a heavy-duty 4-jaw grease coupler Snaps directly onto a jaw type coupler Works best with the LockNLube® Grease Coupler For manual grease guns.

locknlube.com

 

[radas]

Tom - that might have been why I didn't have trouble the first time I greased the tractor. My old grease gun had a "standard" fitting, the new one has a lock-n-lube fitting.

FYI locknlube makes a "standard" fitting with a grease zerk at the end that you can clamp the locknlube fitting on to get to harder to access zerks. I ordered their full accessory kit and it's really come in handy for the FEL angled zerks and for my ZTR.

 

[lynnmor]

Thanks for the update. I just found another grease fitting on mine that was clogged with paint and I didn't detect it before because my pneumatic grease gun has no feel and that joint can't be seen without a mirror. With it clicking away I thought it was working, so look for painted fittings and watch for grease coming out. I do use a lock-n-Lube and it fits everywhere.