November financing

[BuckeyeStateOfMind]

What do you think the chances of the 84mos with 0% interest continues past October 31st?

 

[sn0wman72]

Seems like some form of 0% financing has been going on forever...I suspect it will continue

 

[SidecarFlip]

+1. Kubota is pretty much set a precedent with that.

 

[PaulL]

Some form yes. 84 months - that seems to move around from model to model based on demand. So that's a bit more risky.

 

[SDT]

What do you think the chances of the 84mos with 0% interest continues past October 31st?

Likely, but anyone who can accurately predict future interest rates need never work again.

SDT

 

[blackdogfarms]

Our region in the Carolinas just extended it until December. And it now includes the 2501 and Grand L 3560 and 4060.

I am getting a 2501 HST with BB, RC, FEL, Grapple and forks for $300.mo delivered with loaded R4 tires

 

[drewzee87t]

Blackdogfarms -

So, $25,200? Was that on the 84 Mo? I am pricing my own potential L2501 and want pretty much the same setup but also want top/tilt and telescoping stabilizer. Any intelligence on pricing is helpful.

Please add more info if you got it...thanks

 

[blackdogfarms]

Blackdogfarms -

So, $25,200? Was that on the 84 Mo? I am pricing my own potential L2501 and want pretty much the same setup but also want top/tilt and telescoping stabilizer. Any intelligence on pricing is helpful.

Please add more info if you got it...thanks

Yes on 84 months. Prolly add another $700 for rear remotes. + stabilizers

But I am all in right at $25k.

do you want a break down of costs? Prolly a few hundred cheaper to buy implements on your own for cash but it’s great to finance it in the deal. Even if it’s the lower entry level implements ,I don’t need anything heavy duty.

 

[drewzee87t]

Thanks for the help. I met with my guy today and one thing to another, I talked myself into a 3901. Then I bought the used B2910 that I came in for Saved about $20k.

 

[PaulL]

Thanks for the help. I met with my guy today and one thing to another, I talked myself into a 3901. Then I bought the used B2910 that I came in for Saved about $20k.

Love that logic. You'll be happy with that machine I suspect.