Let me clarify. With the 3 point lift lever in full up position, the FEL will barely move, meaning won't go up, down, dump or curl. If I drop the 3 point down just a little, then every function on the FEL does what it is supposed to. BUT recently the FEL loader has lost power to pick up much weight no matter where the 3 point lift lever is. With no weight or little weight in the FEL- and the 3 point not fully in the highest lift position-the FEL loader does every function up, down, curl, dump. If I put 200 pounds in the FEL- then the won't pick it up. Example= I have the FEL loader bucket about 2 feet off the ground and load four 50 pound bags of seed in the bucket- now the FEL will not lift any higher. It will go down and try to curl and dump, but it will not lift any higher..
If I get a scoop of gravel in the bucket, the FEL will not lift it off the ground at all. Before the loss of power I could scoop a bucket full of gravel with no problem UNLESS the 3 point lift was in its fully up position. Thanks for your response.
If I get a scoop of gravel in the bucket, the FEL will not lift it off the ground at all. Before the loss of power I could scoop a bucket full of gravel with no problem UNLESS the 3 point lift was in its fully up position. Thanks for your response.
