Newbee question

cowboy5T

New member
Jun 2, 2015
1
0
0
Oklahoma
My first posting on this forum, I am looking at a 9540 with a Hy shuttle trans they said it slips in reverse, question is what would cause this and how much is it going to take to fix?
 

mickeyd

Active member
Lifetime Member

Equipment
2014 L3200 DT w/LA524 FEL, 2019 Kubota Z121S w/ 48" Pro Dec, TG1860G w/RCK54TG
Mar 21, 2014
1,192
18
38
Guin, AL
Welcome to OTT Cowboy. How many hours on it and is it in bad shape?
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,285
6,443
113
Sandpoint, ID
If it's truly only slipping in reverse and not forward than I would suspect the shuttle valve is not working correctly.
But if it's actually slipping in both then I would think more towards the hydraulic clutch pack is failing.

Both are not that hard to work on, but both are not "cheap" to repair or replace.
You could be looking at $1500+ in parts and 1000+ in labor so act accordingly.