Hi guys. I’m Adam and I bought my first Kubota in July. A friend sold me his 2007 BX24 w/ 260hrs on the clock. So far, I’ve built a set of bucket forks, a rear ballast, and added lights to the ROPS. I’ve also been messing around with ‘60s and ‘70s IH Cub Cadets since 2009.
New guy from Indiana
- Thread starter BXHoosier
- Start date
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Adam,
glad to have you on board! Great place to get info.
Send us some pictures..... orange or any other color
Lil Foot
Well-known member
Lifetime Member
Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
I’ve also made a set of 3-point stabilizers, a receiver hitch, 50 lb ea wheel weights, belly shield, and 50cal ammo can tool box. I’m currently working on a bucket level indicator that works at all heights as well as with my forks.
Attachments
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
The stabilizers are nice too - there is guy (Hodge) here on OTT that makes them - his are very impressive also.
It’s between 400-500lbs. There’s a dead 3/4hp cast iron motor and about 50 lbs of scrap metal in it along with 3-1/2 80 lb bags of concrete
That’s where I got the idea. The turnbuckles are a huge PITA.The stabilizers are nice too - there is guy (Hodge) here on OTT that makes them - his are very impressive also.