Needing a Zen-Noh l1801dt Head gasket, oring and torque values

[tdnp]

First, Thanks for such a great fourm. I have a l1801dt and LOVE it. But blew the head gasket on the front cylinder. So I need a head gasket, oring that fits around the oil jacket for the head and the torque values.

Any help would be great.

Thanks again for the fourm.

Tim

 

[palomar]

Do you know which engine it has?

 

[tdnp]

I did not realize that there were diffrent options. How can I tell?

 

[tdnp]

Thanks Vic,

Gasket and shipping to 66414?

do you also have the o'ring seal for around where the oil jacket comes up from the block?

Thanks for the help.

Tim

 

[tdnp]

Where the oil comes from the block to the head it looks like there is an O'ring there. I will look tonight and tak a pic if there is one there so you can see where I an talking about.

I will take the head gasket let me know how you handle payment. But lets wait for shipping until I check on the oil O'ring

Thanks for the help

 

[tdnp]

here is the pic of the O'ring

 

[tdnp]

Thanks for the help and information. PM sent

 

[tdnp]

Awsome Service from Service Department Vic, would highly recommend.
Thanks for the parts and advice.

 

[meanjean]

I as well need to replace the head gasket on my 1801. I purchased a high temp silicone.
Will that be suffifient?

 

[tdnp]

No Silicone will not work you must have a gasket and torque the bolts to the correct range. Service Dept Vic has the gasket.