Need info about valves

[TheOldHokie]

I measured that wrong.
The depth of the hole is very close to 1"
That's bspp 1/2 right?
I'm not sure it's sae. I tried to screw in a 1/2 bolt in there and the thread doesn't match

,820 is dead on 1/2" BSPP and not close to anything SAE. If that is the plug out of the N port you have a real good chance a P40G PB sleeve from Summit will work in your valve - $21 and free shipping.

Power Beyond Adapter Sleeve for P40G Series Summit Monoblock Valves

FREE SHIPPING Power Beyond Adapter Sleeve for P40G Series Summit Monoblock Valves

summit-hydraulics.com

Dan

 

[JohnDB]

You have a valve you purchased from Vevor or you have one that looks like that? Is it marked with a country of origin?

This valve looks exactly like the OP's valve but I know for a fact it is not made in China - it is made in Bulgaria by Badesnost. I have used lots of those valves over the last 10+ years and they have all come frome Eastern Europe (Bulgaria, Poland, et.al.) Summit was and may still be selling Badesnost valves. I have even purchased direct from suppliers in those countires. The Chinese clones are relatively new to the market.

Dan

View attachment 90552

True, the one I have doesn't have a country of origin marked on it, so maybe it was made somewhere other than China. The cast-in letters for the PNT ports on the OP photos looked to me exactly like mine (photo taken before I installed it April 2021) leading me to maybe jump to a wrong conclusion 2-bolt mount could be another distinguishing feature.

Regardless, glad that we have sorted out the correct size for PB sleeve

 

[awesome]

True, the one I have doesn't have a country of origin marked on it, so maybe it was made somewhere other than China. The cast-in letters for the PNT ports on the OP photos looked to me exactly like mine (photo taken before I installed it April 2021) leading me to maybe jump to a wrong conclusion 2-bolt mount could be another distinguishing feature.
View attachment 90581

Regardless, glad that we have sorted out the correct size for PB sleeve

Yeah that looks more like mine.

I've ordered a sleeve from a local shop. 15$ so that's not bad at all.

I cancelled my order of the other valve because they quoted me too high. I can't get anything under 800$ around here. Except at PrincessAuto. So if the sleeve doesn't work, I'll buy from summit and get it shipped to the in-laws in florida and they can cross it back here at xmas. Or I can just get it shipped at the border and drive 2h to get it. It would still be worth it. Any chance you live near Ogdensburg NY @TheOldHokie ?

 

[TheOldHokie]

Yeah that looks more like mine.

I've ordered a sleeve from a local shop. 15$ so that's not bad at all.

I cancelled my order of the other valve because they quoted me too high. I can't get anything under 800$ around here. Except at PrincessAuto. So if the sleeve doesn't work, I'll buy from summit and get it shipped to the in-laws in florida and they can cross it back here at xmas. Or I can just get it shipped at the border and drive 2h to get it. It would still be worth it. Any chance you live near Ogdensburg NY @TheOldHokie ?

No but as I said USPS wants $57 to ship Priority Mail flat rate to Canada - 20# max package weight. That comes out to about $200 deleivered. I have shipped USPS to Canada in the past and its pretty painless on my end. UPS is most definitly not.

Dan

 

[awesome]

Good news. The sleeve in the pdf you posted earlier https://mastersourcinginc.com/pdf/catalogueML.pdf does work. It is 1/2" bspp. I paid 15$ +25$ shipping.

 

[TheOldHokie]

Good news. The sleeve in the pdf you posted earlier https://mastersourcinginc.com/pdf/catalogueML.pdf does work. It is 1/2" bspp. I paid 15$ +25$ shipping.

Super!!

Dan

 

[awesome]

Wrong thread... Can't delete message