Hello,
First time post. Sorry for the length but trying to be thorough. I have a first gen BX1800 (prior to the seat safety switch in later models). It's been a workhorse for over 20 years but now it has me stumped and any insight would be greatly appreciated.
1. Normal operation... If I turn the key to the ON position fuel pump clicks, battery light comes on and other electrical items like headlights etc operate.
2. Now... I turn the key to the ON position and nothing happens. No clicking in the fuel pump, no other electrical items work.
3. If I disconnect the battery and re-connect it when I turn the key to the ON position the fuel pump clicks and other electrical items work BUT JUST ONCE. If I turn the key to OFF and repeat nothing happens until I disconnect the battery again.
4. After re-connecting the battery and it has the working condition from number 3 above and I attempt to pre-heat the glow plugs sometimes the pre-heat light will come on for a second or two then it goes out. If I try to start it I don't get any crank on the starter. Then as mentioned above in number 3 another try results in nothing.
I know throwing parts usually isn't the correct thing to do but I've done it.
A. New starter
B. New Timer relay
C. New IC regulator (looks like all circuits go through there)
D. Checked all the fuses
E. New Battery
I do have the wiring diagram. Any help or insight would be greatly appreciated.
First time post. Sorry for the length but trying to be thorough. I have a first gen BX1800 (prior to the seat safety switch in later models). It's been a workhorse for over 20 years but now it has me stumped and any insight would be greatly appreciated.
1. Normal operation... If I turn the key to the ON position fuel pump clicks, battery light comes on and other electrical items like headlights etc operate.
2. Now... I turn the key to the ON position and nothing happens. No clicking in the fuel pump, no other electrical items work.
3. If I disconnect the battery and re-connect it when I turn the key to the ON position the fuel pump clicks and other electrical items work BUT JUST ONCE. If I turn the key to OFF and repeat nothing happens until I disconnect the battery again.
4. After re-connecting the battery and it has the working condition from number 3 above and I attempt to pre-heat the glow plugs sometimes the pre-heat light will come on for a second or two then it goes out. If I try to start it I don't get any crank on the starter. Then as mentioned above in number 3 another try results in nothing.
I know throwing parts usually isn't the correct thing to do but I've done it.
A. New starter
B. New Timer relay
C. New IC regulator (looks like all circuits go through there)
D. Checked all the fuses
E. New Battery
I do have the wiring diagram. Any help or insight would be greatly appreciated.