I have a B6100 with over 6500 hours on the engine. i depend on the tractor every day, and would like to find a direct replacment engine that is either running or needs to be rebuilt (prefered running). It needs to be a direct replacement for the d650-A thats in the machine now as far as physical size and hook up go. i was wondering if the d750 or d850 would fit in the same space. Any information on where to get an engine would be great.
Need a Replacement Engine
- Thread starter TrippeTree&Timber
- Start date
Looks kind of spendy though.
http://cgi.ebay.com/Kubota-B7100-Co...840?pt=LH_DefaultDomain_0&hash=item4cf0f36a78
http://cgi.ebay.com/Kubota-B7100-Co...840?pt=LH_DefaultDomain_0&hash=item4cf0f36a78
Yeh, that engine isnt worth that much money, it doesnt even have a starter or radiator with it. Thanks for the link though.
Just a thought but, I remember seeing brand new Kubota engines here in the past
https://www.surpluscenter.com/engines.asp?catname=engines
not saying they have what you are looking for but that it's worth a look.
https://www.surpluscenter.com/engines.asp?catname=engines
not saying they have what you are looking for but that it's worth a look.
I suggest you contact Aaron at Diesel Repower in TN (Tel: 423 965 4817). He has a shop full of barely used small Kubota engines, and could tell you which ones might work in your B6100. They retire these diesel engines with very low hours in Japan, and he has a source for them. I bought a D850 and installed it to replace the D750 in my B7100. The engine blocks are the same, but you may have to swap components. I had to use the old oil pan, exhaust manifold, flywheel, and hydraulic pump, but the replacement engine had only about 300-400 hours, and it gave me a few more HP. Was also able to use the water pump to replace the old thermosiphon system with just some minor modifications to the magneto bracket, radiator plumbing, and left side engine grille. The replacement engine runs perfect, and has very good compression.
Big job, but well worth it to get some more life out of your tractor.
Big job, but well worth it to get some more life out of your tractor.
Hey trippe,
I also had great luck with Diesel Repower in TN. Look online as said in earlier post. Perchased a used D950 for my b8200. It was the same engine block which fits up to the tractor, but I did have to switch a few things. .Hydraulic pump was a little different and a few other minor things. But nothing a few gaskets and a day of wrenchen' won't fix. As I recall it was about 1/2 the price of a rebuilt/remanufactured engine.
Mud
I also had great luck with Diesel Repower in TN. Look online as said in earlier post. Perchased a used D950 for my b8200. It was the same engine block which fits up to the tractor, but I did have to switch a few things. .Hydraulic pump was a little different and a few other minor things. But nothing a few gaskets and a day of wrenchen' won't fix. As I recall it was about 1/2 the price of a rebuilt/remanufactured engine.
Mud
http://ginopsales.com/used-engines/#anchor
shipping will be a factor unless you want to go on a road trip....
shipping will be a factor unless you want to go on a road trip....