Mystery switch on Fender

[Forge]

I have a switch on the right fender of my recently acquired B7800 that seems to do nothing. It's not standard equipment and was added, I assume, by the previous owner. The dealer doesn't know what it does. It seems to be wired into the lighting harness.

I've eliminated the obvious (self-destruct, ejector seat etc).

If any of you have any ideas they would be much appreciated. I've attempted to add a picture of it.

Thanks!

 

[Eric McCarthy]

If its wired to the lighting harness my guess would be that its for auxilary lights on the rear of the tractor perhaps.

 

[NHTbolt]

My quess is .... Nitrous Oxide Injection! LOL...!

NH TBolt

 

[Forge]

So that's what those 6 ft flames are..!

 

[Lil Foot]

Seems logical to assume front or rear work lights.... should be simple to trace the wiring.

 

[Forge]

Yes. It now looks like a work light was on there. Previous owner used a snow blower and there it looks like it was a rear mount as there is no sign of wear on the front/middle of tractor. Also there are four screw holes in the fender indicating a mounting position and a spare connect. Only one way to find out...

Thanks

 

[chim]

Suggestions:

1. Put your helmet and Nomex suit on

2. Fasten your seat belt

3. Say a prayer

4. Flip the switch

5. Report back after you land safely

 

[tomboyy]

Looks like the go switch for a missle launcher

 

[Sterno]

You probably just need a fresh bottle of nitrous oxide to make that switch work.

GO BABY GO!!!

 

[Forge]

Yes. I just took out the neighbor's green machine. Pity....