Mowing in mud

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,237
4,816
113
North East CT
I wonder how the operator faired in the rollover. If he were wearing the seat belt, most likely have a few scratches and bruises. If not it is anyone's guess.
 
  • Like
Reactions: 1 user

Moose7060

Well-known member

Equipment
M7060, L3902 HST, Farm King PT740, HLA 2500 Snowpusher, LandPride RCR1872
Oct 14, 2023
508
1,135
93
bc
Regardless of operator error or not, that is an ugly sight to see. Sure hope the operator faired well after this.
 
  • Like
Reactions: 1 users

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
13,814
5,556
113
40 miles south of Kansas City
I got that picture off the internet and locals reported the operator was fine. They also make comments about the ROPS probably saved him.
 
  • Like
Reactions: 3 users

Henro

Well-known member

Equipment
B2910, BX2200, KX41-2V mini Ex., Beer fridge
May 24, 2019
5,781
2,965
113
North of Pittsburgh PA
I got that picture off the internet and locals reported the operator was fine. They also make comments about the ROPS probably saved him.
New tractor, new operator(?), new experience! That’s quite a slope to be mowing across!

Glad to hear the operator is OK.

Hope they didn’t try to start the tractor (without taking the proper measures) after righting it!

EDIT: I think this thread would have been ON TOPIC in the tractor operating forum!
 
Last edited:
  • Like
Reactions: 1 user

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,401
4,899
113
Greensville,Ontario,Canada
It looks like a pretty steep angle to be mowing 'crossways' ??
Guys here use mowers on end of articulated booms. Faceinating to watch the one guy as he gets within 3 inches of fences lines, around hydro poles, etc.
 

Flintknapper

Well-known member
Premium Member

Equipment
L2350DT
May 3, 2022
1,764
2,216
113
Deep East Texas
The slope of that hillside is right at the cusp (if not beyond) what a tractor might be able to handle.

The trouble with those type of scenarios is that all you need to have happen is to drop a tire off in a small hole/depression on the downhill side and the momentum will carry you over every time.
 
  • Like
Reactions: 1 user

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,516
2,546
113
Peoria, AZ
The trouble with those type of scenarios is that all you need to have happen is to drop a tire off in a small hole/depression on the downhill side and the momentum will carry you over every time.
Or soft spots due to standing water.
 
  • Like
Reactions: 1 user

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,134
5,193
113
Chenango County, NY
By the look of the ruts on the top edge of the slope, he might have been trying to get away from that, but got too far into it to correct himself.

Loader on besides changes COG on such a steep slope. What appears to be a little drop-off made matters worse.

Bet it was scary, especially if they recognized they were in trouble and were trying to get themselves out of danger’s way.

Only he/she knows. So glad to hear the operator is okay.
 
Last edited:

Bearcatrp

Well-known member

Equipment
BX1880 with loader, mower and 3 point
Mar 28, 2023
620
338
63
Minnesota
Ouch. That sucks. Glad the operator is ok. As stated above, operator found him/her self in trouble and made more mistakes until it went over. Makes me rethinking of using my ROPS when cutting grass. Have a ditch that has a similar slope.
 
  • Like
Reactions: 1 user

Biker1mike

Well-known member

Equipment
B6200, Kubota 2030 Front Blade, King Cutter 60" finishing deck
Jan 11, 2022
1,177
1,278
113
Gallatin, NY USA
Glad operator is okay. All that equipment looks brand new. I wonder if he/she read the owners manual about hills or if the the dealer had a safety talk before sending it out the door.