My kubota L3240 engine locked up. Found a good d1703 engine from a bobcat. Just wondering how hard and what all is involved before I pull the trigger. Greatly appreciated the anticipated help!!!
Motor swap question
- Thread starter Ctipton55
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
It's a pretty straight forward swap.
Unbolt and split it and remove old motor and install new motor.
Your very likely going to need to swap out a few parts on the engine, Oil pan, intake manifold, exhaust manifold and a host of other parts.
Unbolt and split it and remove old motor and install new motor.
Your very likely going to need to swap out a few parts on the engine, Oil pan, intake manifold, exhaust manifold and a host of other parts.
governor might be different. Linkages, just compare the two engines and you'll figure it out
Hey wolf man, that engine I found fell through, I have zero idea what else to look for so it’ll fit in my tractor. Imma newbie. Any ideas? Thank ya sir
Alright folks im back at. Last engine deal fell through and can’t really get any answers I’m looking for. Now I’ve found a d1803-cr-ef01.
I know things gotta be changed out between engines. But will this engine work in my L3240? Thanks a ton
I know things gotta be changed out between engines. But will this engine work in my L3240? Thanks a ton