Mini Excavator Pulling Teeth

[whatsupdoc]

I need to replace all the bucket teeth (5) and one tooth adapter. The teeth are
held by a roll pin installed top to bottom. I managed to remove one pin
without issue but the rest are frozen. I tried some heat and a 3lb hammer but it did not seem to help.

I stopped before I mashed them, so any tricks ?

 

[Gaspasser]

Do you have the correct size punch? Also are they tapered or straight? Penetratung oil, heat, cooling and persistence with the correct size punch wins the day. I learned all about this removing a PTO knuckle this winter thanks to the folks on this forum. Good luck.

 

[North Idaho Wolfman]

I need to replace all the bucket teeth (5) and one tooth adapter. The teeth are
held by a roll pin installed top to bottom. I managed to remove one pin
without issue but the rest are frozen. I tried some heat and a 3lb hammer but it did not seem to help.

I stopped before I mashed them, so any tricks ?

If you give better details you might get better answers.
Like make and model, and pictures.

 

[Lil Foot]

There are lots of utoob vids dealing with this subject too.