Mid remote for function

[PoTreeBoy]

View attachment 173901
View attachment 173902 View attachment 173903

Well I'll be! Thanks

 

[erichalverson0360]

Post a couple pictures of the valve.

To answer your original question, if the valve is a double acting directional control valve it could be used for a third function. But based on your description it may not be a directiobal control valve. My suspicion is it is a diverter for the backhoe. Even if it is a directional valve it would be terribly inconvenient as a third function. .Adding an electric 3rd function control vslve between the loader PB and the mystery valve is a much better way to go.

Dan

I tend to agree with you. I was just trying to figure out what it is. It appears to feed back toward the backhoe so it maybe for running something like a load splitter from the ground. Perplexing.

 

[erichalverson0360]

Hmmm. The online l45 parts definitly ,(??) has the 3pt linkage in the options section. In any event Eric probably wants an electric third function. I currently have a manual valve on mine. It wirks OK but less than optimal. It was supposed to be a "quick and dirty" while I engineered my own electric version but fibrotic lungs got in the way of the quick part. Its back on my bucket list for this summer.

I'm leaning toward an electric 3rd function, probably summits. They have one for a l39 and l47. Which one is closer to a l45? Does the pressure feed to it come off the loader PB port?

 

[TheOldHokie]

I'm leaning toward an electric 3rd function, probably summits. They have one for a l39 and l47. Which one is closer to a l45? Does the pressure feed to it come off the loader PB port?

Hard to answer those questions with any certainty.

Yes, the pressure comes from the loader PB.

L39 uses the TL1000A loader same as your L45

L47 uses the TL1300 loader

The Summit kit is pretty much agnostic. Based on their skimpy pictures and description the main differences are the vakve nounting bracket and possibly length of the hoses.

Its not my money so I would go with the L39/TL1000A kit. The valve, joystick handle, wiring, boom hoses, and brackets should work fine. You may need to buy different supply side hoses or fittings.

Ask Summit for guidance.

Dan

 

[erichalverson0360]

Indeed.

Dan

 

[erichalverson0360]

See attached photos

I was thinking home brew as well but for what? Hopefully we get film by 11.

Dan

I have tried to attach the file. It keeps line through it. Did it come through

 

[North Idaho Wolfman]

I'm leaning toward an electric 3rd function, probably summits. They have one for a l39 and l47. Which one is closer to a l45? Does the pressure feed to it come off the loader PB port?

You really need to post a picture of what your looking at, get a kid, or grandkid to do it for you if your not tech Inclined!

 

[North Idaho Wolfman]

Use this button.