M8560 compatible rear remote hydraulics

[OkieM8560]

I have a 2012 M8560 cab that currently has 1 rear remote hydraulic outlet. I'm trying to find an affordable method of adding 2 more floating outlets for winged implements.

Is there a range of models with the same setup that I can get a salvage hydraulic outlet from?

 

[Dave_eng]

From what I see:
VALVE,AUX.CONTRO, Part # 3C081-82542

There are a few I missed in the screen shots + could only post 5 photos

Dave

 

[SDT]

I have a 2012 M8560 cab that currently has 1 rear remote hydraulic outlet. I'm trying to find an affordable method of adding 2 more floating outlets for winged implements.

Is there a range of models with the same setup that I can get a salvage hydraulic outlet from?

I expect that finding salvage Kubota remote hydraulic valves will be difficult.

SDT

 

[OkieM8560]

From what I see:
VALVE,AUX.CONTRO, Part # 3C081-82542
View attachment 58742
View attachment 58743
View attachment 58744
View attachment 58745
View attachment 58746

There are a few I missed in the screen shots + could only post 5 photos

Dave

Thanks Dave! That's exactly what I needed.

 

[OkieM8560]

Is there a way to distinguish floating vs. "Push and hold" type valves on a tractor that doesn't run? I have always just pushed on the detent and if it pops out with engine running it's not a floating valve.

 

[Dave_eng]

Is there a way to distinguish floating vs. "Push and hold" type valves on a tractor that doesn't run? I have always just pushed on the detent and if it pops out with engine running it's not a floating valve.

My M7040 came with one remote and I had a second added.

The second one has a detent where it locks on until the pressure rises.

Externally the added remote has a metal can stuck out the backside like a loader valve with a detent. I do not think the float detent would look different externally but have not seen one to state for certain.

Dave