M7060 Wanting LED Work Lights

[Txphantom]

I have a M7060 that I’m wanting to convert the work lights to LED. Has anyone just replaced the OEM bulbs with LED or was the whole assembly needed to be replaced. I’ve seen replacement assemblies for $70 each with plug-n-play connections at tiger lights.com I’ve read where the LED get hot I’m wondering if the whole assembly may need to be replaced as the new lights have built in heat sinks. Any help would be appreciated. Thanks, Phantom

 

[Roadworthy]

If you can find a LED bulb to replace an existing bulb it will usually generate less heat than the incandescent. A work light is generally a low wattage light so there should be no issue. If the replacement units have heat sinks they may be more powerful than the original or have more functionality such as adding spot or flood lights.

 

[SDT]

I have a M7060 that I’m wanting to convert the work lights to LED. Has anyone just replaced the OEM bulbs with LED or was the whole assembly needed to be replaced. I’ve seen replacement assemblies for $70 each with plug-n-play connections at tiger lights.com I’ve read where the LED get hot I’m wondering if the whole assembly may need to be replaced as the new lights have built in heat sinks. Any help would be appreciated. Thanks, Phantom

New M4 tractors and probably new 7060s (no, not certain) have LED work lights as standard equipment.

Most likely, these are bolt on replacements for the older Halogen work lights. Again, not certain.

They will not be inexpensive.

SDT

 

[Txphantom]

If you can find a LED bulb to replace an existing bulb it will usually generate less heat than the incandescent. A work light is generally a low wattage light so there should be no issue. If the replacement units have heat sinks they may be more powerful than the original or have more functionality such as adding spot or flood lights.

Thank you sir for your information. I’ll do a little more investigation on the new lights to see what if any options they may have.
Phantom

 

[Txphantom]

New M4 tractors and probably new 7060s (no, not certain) have LED work lights as standard equipment.

Most likely, these are bolt on replacements for the older Halogen work lights. Again, not certain.

They will not be inexpensive.

SDT

Thank you sir, I’ll check with my local dealer to see what the new models have for work lights and will report back.
Phantom

 

[Popgadget]

I have the Tiger Light LED work lights on my L6060 and am very happy with them. I also changed the head light and side light bulbs to LED.

 

[Txphantom]

I have the Tiger Light LED work lights on my L6060 and am very happy with them. I also changed the head light and side light bulbs to LED.

Thanks for sharing about the Tiger Lights. I’m probably going to be doing the same thing as you on mine.
Phantom

 

[SDT]

I have the Tiger Light LED work lights on my L6060 and am very happy with them. I also changed the head light and side light bulbs to LED.

Can you provide information about the LED replacement bulbs you used to replace the incandescent head and side light bulbs on your L6060?

SDT

 

[Popgadget]

Can you provide information about the LED replacement bulbs you used to replace the incandescent head and side light bulbs on your L6060?

SDT

the headlights are H4 bulbs, I found these without clunky heat sinks or pigtails. https://www.ebay.com/itm/153776370034
the side lights are 7443/7440 bulbs, I got those on Amazon.