Lxx60 series top link length with quick attach hitch

[fishpick]

Pretty much the title.

Adding a hydraulic toplink and what I have learned is that they are LESS adjustable in terms of the piston length than the manual top link... obviously this makes sense when you think about it but didn't think about it until NOW!

So - what length top link do folks use when you have a quick attach (Landpride in my case) - I'm thinking a 2.5" cylinder that goes from 21.5" to 29.5" center of pin to center of pin should be just about right... But thought I'd see what others are running.

 

[MtnViewRanch]

For the cat 1 Grand L tractors, a 21"-31" working length seems to work best.

 

[fishpick]

For the cat 1 Grand L tractors, a 21"-31" working length seems to work best.

That with a quick hitch?

 

[MtnViewRanch]

A std full 3pt quick hitch does not change the top link dimensions.
Only draft arm quick hitches like Pat's quick hitch change what length the top link would need to be.

 

[fishpick]

@MtnViewRanch - top link ordered today to those specs above! Thanks!